Eurocode
>Click here to download product sheet
Eurocode 1 - Loads and Combinations
- Module to define the dead, live, wind and snow load according to the Eurocode 1. All loads are grouped into load cases. These cases are automatically combined into load combinations.
- Wizard technology for generating Eurocode 1 dead, live, wind and snow load
- Library with self weight elements
- Advanced contour analysis
- The generated loads are presented in a spreadsheet for viewing and editing.
- Loads are automatically assigned to the structure, grouped into load cases.
- Generation of fundamental, accidental, rare, quasi permanent and frequent load combinations.
- Generated loads and combinations can be viewed and modifiedpe
Eurocode 2 - Reinforced concrete design
- Module to design reinforcement bars and stirrups for concrete according Eurocode 2.
- Concrete design for beam, rib, floor, strip and columns
- Settings for cover upper and lower side
- Interactive selection of basic and additional reinforcement and stirrups
- Design wizard for automatic design of reinforcement bars and position
- Tooltip information about the applied code
- Numerical and graphical presentation of the position of bars and stirrupsØó
Eurocode 3 - Steel code check and design
- Module for code check and design for steel sections according Eurocode 3.
- Cross section-, buckling-, and lateral buckling check
- Torsion- and torsion buckling check
- Integrated calculation of buckling length for braced and sway frames
- Automatic section classification 1 till 4
- Separate input of lateral buckling supports to upper and/or lower flange
- Automatic lateral buckling check for all lateral buckling situations
- Determination of the decisive unitycheck
- Integrated with both linear elastic and non linear analysis options
- Also for tapered and castellated beams
- Deflection analysis and check
- Section optimisation including new analysis of the structure with new sections followed by new steel check based on new forces
Eurocode 3 - Steel joint connection design
- Module for check and design of bolted endplate joint connections according Eurocode 3.
- Column-base: pinned en moment
- Column-beam: pinned and moment
- Beam-beam: pinned and moment
- M-Phi diagram
- Library with standard connections
>Click here to download product sheet